section
Electric back and leg section adjustment with automatic triple action knee break.
Specifications : |
|
| otal weight | 98 kg |
| Lying surface dimensions | 100 x 200 cm |
| External dimensions | 113 x 213 cm |
| Safe capacity | 170 kg |
| Maximum person weight | 135 kg |
| Height adjustment | 37-83 cm, low version 32-78 cm |
| Lifter space | 15 cm, low version 10 cm |
| Side rail height | 37 cm with sprung slats 34 cm with ripolux® |
| Special sizes | 80–140 cm widths, 180–220 cm length |
A modern classic for proper rest
belluno is the classic among modern care beds. This bed combines maximum comfort and ease of use with an attractive price. The professional design and economy of the belluno have proved themselves thousand times use in home care use both at home and in the area of rehabilitation and therapy.
The lying surface is available as a 4-section option. In addition, the lying surface can be fitted - besides the stable slatted frame - with the patented ripolux® anti decubitus system or the hygienic ripoplan plastic board system as an option.
The variegated possible combinations of the equipment not only allow optimal bedding conditions but they also guarantee an individual, deman-ortiented resting and sleeping. With the modern clip system, belluno can be assembled and dismantled easily and quickly by one person. To minimise the environmental impact, there is virtually no packaging on delivery.
- Primary fuse in the power plug
- Secondary fuse/polyswitch
- Thermal release
- Disabling function
- Hand control with single fault safety
- Special spiral mains cable
- Anti-kink cable management bracket
- Water-resistant to IPX4
- Distortion-free, highly stable side railsMains isolation system
Safety guarantees :
-section
Electric back and leg section adjustment with automatic triple action knee break.
Specifications : |
|
| Total weight | 82 kg |
| Lying surface dimensions | 90 x 200 cm |
| External dimensions | 103 x 221 cm |
| Safe capacity | 170 kg |
| Maximum person weight | 135 kg |
| Height adjustment | 40-81 cm |
| Lifter space | 23 cm |
| Side rail height | 37 cm with sprung slats 34 cm with ripolux® |
| Special sizes | 180–220 cm length, special widths not possible |
- Primary fuse in the power plug
- Secondary fuse/polyswitch
- Thermal release
- Disabling function
- Hand control with single fault safety
- Special spiral mains cable
- Anti-kink cable management bracket
- Water-resistant to IPX4
- Distortion-free, highly stable side railsMains isolation system
Low-cost, high-quality
With domiflex, Bettenhaus Hammerer is setting new standards when it comes to fulfil personal and legal requirements relating to healthcare. As a standard care bed it has not only a convincing price but due to its high quality it is also a long-lasting ancillary care equipment.
domiflex has a stable 4-section lying surface with a slatted frame which can be conveniently adjusted via the electronic hand control with an integrated disabling function. The head and foot sections are lined with patterned wooden board on the inside for more cosiness.
domiflex is delivered with Bock‘s packaging-free transport and storage system. The bed is assembled quickly and easily with screws that can be tightened and undone by hand.A new manufacturing system simplifies the construction of domiflex and the use of materials. With domiflex, operators and users can therefore continue to draw upon the proven quality and functioning of Bock‘s health beds without restriction.
Safety guarantees :
The belluno bed frame, as shown in the picture, must be ordered seperately.
5-section
Electric back and leg section adjustment with automatic triple action knee break.
Specifications : |
|
| Total weight | 67 kg |
| Lying surface dimensions |
90 x 200 - 100 x 200 cm |
| Safe capacity | 170 kg |
| Maximum person weight | 135 kg |
| Height adjustment | 46 cm, 27 cm lowest position |
| Lifter space | 9 cm, with castors 10 cm |
| Special sizes | 180–220 cm length, special widths only possible as belluno bed-in-bed-system |
- Primary fuse in the power plug
- Secondary fuse/polyswitch
- Thermal release
- Disabling function
- Hand control with single fault safety
- Special spiral mains cable
- Anti-kink cable management bracket
- Water-resistant to IPX4
- Distortion-free, highly stable side railsMains isolation system
Multifunctional bed-in-bed system
variolift is a superb multifunctional bed-in-bed system. Its extremely low construction height allows it to be combined with almost any bed frame.
On request variolift can be equipped with feets for free standing.
The belluno bed frame, as shown in the picture, must be ordered seperately.The 5-section lying surface with an integrated head rest ensures that the bed is very comfortable to lie on and can be adjusted electrically throughout. The wooden sprung slats of the lying surface and the individual adjustment of the degree of tension make it possible for the occupant of this bed to rest and sleep in a healthy manner. The lying surface is 190 cm long, but is also available with a length of 200 cm as an option. The width can be converted from 90 cm to 100 cm via matress clamps. The supporting surface of the 4-section variant is also available in the shape of ripolux® or ripoplan as an option.